Passive Universal Power Distribution Board
Whether it’s Serge, MOTM, CGS, MFOS, Frac, BugBrand, Slightly Nasty, or other format of modular that uses a 4pin 0.100” Amp or 0.156” Molex style headers, this board should work for you!
Whether it’s Serge, MOTM, CGS, MFOS, Frac, BugBrand, Slightly Nasty, or other format of modular that uses a 4pin 0.100” Amp or 0.156” Molex style headers, this board should work for you!
Whether it’s Serge, MOTM, CGS, MFOS, Frac, BugBrand, Slightly Nasty, or other format of modular that uses a 4pin 0.100” Amp or 0.156” Molex style headers, this board should work for you!
Whether it’s Serge, MOTM, CGS, MFOS, Frack, Slightly Nasty, BugBrand or other format of modular that uses a 4pin 0.100” Amp or 0.156” Molex style headers, this board should work for you!
This passive Power Distribution board accepts your positive, negative and ground rails via a screw terminal and distributes the power across 10 0.156” Molex connectors and 11 0.100” amp right angle headers.
Perfect for mounting in a 4U Serge style boat, or 3U Euro/Frac style enclosure!
4P connector pinout:
Pin 1 : -V
Pin 2: GND
Pin 3: GND
Pin 4: +V
*Be mindful of if your modules require +/-12V or +/-15V. This power distribution board can handle either, but not both at the same time.
Most modules can be adapted from +/12V to +/-15V with minimal resistor changes. You’ll have to check the build documentation for those modifications.