LOW-PASSIVEMATRIX_WEB.png
LOW-PASMAT-PCB Bottom Web.png
low-matrix-pan_front.jpg
LOW-PASMAT-PCB WIRING.png
LOW-PASMAT-PCB Top Web.png
LOW-PASSIVEMATRIX_WEB.png
LOW-PASMAT-PCB Bottom Web.png
low-matrix-pan_front.jpg
LOW-PASMAT-PCB WIRING.png
LOW-PASMAT-PCB Top Web.png

5x5 Passive Matrix Mixer

from $19.99 
DESCRIPTION

The 5x5 Passive Matrix Mixer is an easy to build solution for those looking for an affordable matrix mixer that isn't format specific.

DETAILS

  • DIY PCB

  • Current: 0mA (Passive)

Module / DIY:
Quantity:
Add To Cart
DESCRIPTION

The 5x5 Passive Matrix Mixer is an easy to build solution for those looking for an affordable matrix mixer that isn't format specific.

DETAILS

  • DIY PCB

  • Current: 0mA (Passive)

DESCRIPTION

The 5x5 Passive Matrix Mixer is an easy to build solution for those looking for an affordable matrix mixer that isn't format specific.

DETAILS

  • DIY PCB

  • Current: 0mA (Passive)

The 5x5 Passive Matrix Mixer is an easy to build solution for those looking for an affordable matrix mixer that isn't format specific. The PCB was simply made to reduce the need for time consuming wiring. Potentiometers are 1" centered for easy drilling. (due to size, PCB is not Eurorack compatible)

Build Guide: See image below
Bill of Materials: (25) 10K resistors, (25) B100K 9mm Potentiometers, 10 jacks of your choice

Here's a quick Tayda list:
QTY 25: B100K 9mm pots:
QTY 25: 10K 1% Metal Film 1/4W Resistors:

Take your pick of jacks...
qty 10 : 3.5mm jack
or
qty 10: 1/4" jack


Panel Drawing: Click Here